Our guest blogger today is Les Paugh Sr. who was married to Gail’s cousin, Treva. Here he tells about working with Gail’s husband Clyde in the El Dorado oil field.
“Hi Virginia: You got me started, here’s another story.
When I first talked to Clyde about the job I told him I didn’t know one end of a drilling rig from the other. He asked me I could learn, couldn’t I. I told him I had learned how to do a lot of other jobs. He hired me on the spot for the Red Drilling Company. It was November 1957.
My first night on the job after he introduced me to the other roughneck and the derrick man, he said, “you ready to take a trip”. I thought to myself, Hey this is going to be great, just starting and get to take a trip. We went out on the deck and they showed me what to do. The previous crew had pulled the drill stem out and had put on a new drill bit. We took a trip alright, put 3000 foot of drill stem back in the hole. When we got done, Clyde asked me “how did you like the trip?” I told him if it was ok with him I would take the train next time. They all thought that was a good answer. So I got along good from then on.
About a week later Clyde asked me if I would like to work in the derrick, I told him I wanted to learn as much as I could. the derrick man showed me what to do. About 60 foot in the air and they had a tarp wind break around the platform. Wasn’t too bad, they took it slow so I could catch on to what to do, then sped it up. I did ok.
We moved the rig and the weather was a little warmer so the derrick man didn’t put the tarp up around the platform. Clyde sent me up in the derrick again, only this time I could see for miles around and it looked a lot different. It didn’t take to long for me to realize that wasn’t my cup of tea up there. I was ok till I seen how high up I was.
In the month of November, we worked 2 weeks. In December, we worked 1 week. Money got tight and the owner of the rig shut it down. I got another job driving truck in a quarry. But that is another chapter in my book of work life.”
Here’s Les Paugh’s Story about the Truck and the Quarry
“The winter of 58 I was working on an oil drilling rig with Clyde Martin, the driller, as a roughneck. Money got tight and the owner of the rig shut it down. Just before Thanksgiving, after the 1st of the year, I found a job in a quarry driving a dump truck. My job was to haul loads of rock up this big hill and dump the load into a chute.
My first load I got to the top, the area wasn’t much bigger than the truck. I came back off the hill, the foreman was waiting for me. I told him he had forgotten to tell me how the devil to turn around at the top. He jumped in the truck got to the top and cut it to the left as hard and fast as he could, then in reverse, dumped the load. On my next load, he was at the bottom of the hill waiting. I went up, dumped the load and when I came down, he had gone inside of his office, so I thought oh boy I passed that test.
A couple days later the loader operator was loading some state trucks, the powder monkeys were working up on a rock ledge setting up charges using electric caps. I had used dynamite, but with the regular fuse and caps. I jumped up on the ledge to see how they were setting the charges. The loader operator had dumped a load of rock into my truck, truck jumped out of gear rolled down and hit a rock, bent the bumper back against the tire. Loader operator had no chain to pull the bumper back. so I went up to the tool shed to get a chain.
The foreman saw me and hollered at me ‘what are you doing up here you are supposed to be hauling rock.’ I told him what had happened and I needed the chain to pull the bumper back away from the tire, and I couldn’t do anything standing talking to him, turned around and went back to the truck. The loader operator asked me what happened at the tool shed. I told him, and he said if I hadn’t stood my ground I would have been fired, but as I did I have got it made now.”